Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Load on RHS beam

Status
Not open for further replies.
johnnytee

johnnytee

Structural
Joined
Apr 19, 2016
Messages
1
Location
AU
Hi not sure how much weight(kg) this beam can take. 150mm x 50mm x 2.0mm gal steel and the length of beam is 5.040m? Want to hang sliding doors from it if it can cope with the weight

Regards
 
Sort by date Sort by votes
Definitely sounds like it won't work. I recommend something with at least a 6mm wall. It needs to be 100mm wide at least just for mating geometry to door head.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nivoo_boss
  • Locked
  • Question Question
Running Tekla on an i5 10400 with Intel UHD 630 graphics
Replies
1
Views
900
Hitech Digital
Hitech Digital
SPR Baker
  • Locked
  • Question Question
Euler buckling Load of Column in Etabs
Replies
0
Views
377
SPR Baker
SPR Baker
sander47
  • Locked
  • Question Question
Impact of BIM on Structural Design Process
Replies
3
Views
362
sander47
sander47
mcdermott2
  • Locked
  • Question Question
RISA Foundation - apply multiple loads to single spread footing
Replies
1
Views
795
BadgerPE
BadgerPE
DrilonShabani
  • Locked
  • Question Question
One-way slab in Etabs!
Replies
0
Views
233
DrilonShabani
DrilonShabani

Part and Inventory Search

Sponsor

Back
Top