Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Load Combinations

Status
Not open for further replies.

Lepista

Civil/Environmental
Joined
Nov 5, 2004
Messages
6
Location
GB
Help!

I have an analysis where there are several different moving loads. I want to combine them in the following fashion: LC1 + LC2 + Envelope(LC3-LC10) + Envelope(LC11-LC22) NOTE the envelope is not an srss of the loadcases. Is there anyway that STAAD can do this...?

Any help much appreciated
 
Probably you need the Beava module. This module is able to generate critical condition for specific elements within the structure.
 
Staad is a prety big Shift in this case.

So what I am doing is to export the data in Excel and combine it there.

It is so Simple an Envelope load combo to be done.
Why they are stil wating.

It is aleady implemented in here Graph mode.



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top