Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LNG at -196°C cryogenic
- Thread starter Flo65
- Start date
EdStainless
Materials
No corrosion issues, so no reason to up the alloy content CF3 should work fine.
It should be solution annealed, some casting specs don't require this.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
It should be solution annealed, some casting specs don't require this.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Question
