Jun 10, 2004 #1 Keef Mechanical Joined Oct 31, 2002 Messages 27 Location GB Can anyone tell me if there are any ANSI/DIN standards relating to the design of liquid drain traps, in particular, for use on compressed air systems?
Can anyone tell me if there are any ANSI/DIN standards relating to the design of liquid drain traps, in particular, for use on compressed air systems?
Jun 12, 2004 #2 imok2 Mechanical Joined Oct 21, 2003 Messages 1,311 Location US All compressor condensate is to be disposed of in accordance with all local, state and federal regulations so its hard to determine one that fits all. Upvote 0 Downvote
All compressor condensate is to be disposed of in accordance with all local, state and federal regulations so its hard to determine one that fits all.
Jun 13, 2004 #3 unclesyd Materials Joined Aug 21, 2002 Messages 9,819 Location US This is a good general information source on compressed air quality. http://www.onlinemro.com/stores/mro/html/airquality.html Here is one source for automatic drains. They are several others in fact any steam trap manufacturer has drains. http://www.armstrong-intl.com/products/drntraps/dt.php3 Upvote 0 Downvote
This is a good general information source on compressed air quality. http://www.onlinemro.com/stores/mro/html/airquality.html Here is one source for automatic drains. They are several others in fact any steam trap manufacturer has drains. http://www.armstrong-intl.com/products/drntraps/dt.php3