Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LinuxCAD from Softwareforge.com
- Thread starter ubercad
- Start date
MikeHalloran
Mechanical
Yep.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
FrankMalone
Mechanical
There is a more expensive CAD-CAM-CAE application for Linux called NX but is a top CAD-CAM-CAE application.
Frank.
Frank.
- Thread starter
- #4
MikeHalloran
Mechanical
I've heard of it.
.
Okay, I've been to their website a while back, while I was also searching for a Linux CAD tool. It didn't look that great then; maybe it's better now.
Mike Halloran
Pembroke Pines, FL, USA
.
Okay, I've been to their website a while back, while I was also searching for a Linux CAD tool. It didn't look that great then; maybe it's better now.
Mike Halloran
Pembroke Pines, FL, USA
ubercad,
Search Google. There are some nasty links out there, altought they do not appear to be recent.
If you are looking for Free Software CAD, check out Qcad at Ribbonsoft. I would not want to run Qcad professionally, but it is adequate for CAD work for you own home renovations.
If you are willing to spend money, VariCAD is available, and is supposed to be quite good.
If you are willing to spend a lot of money, UGS is available for Linux, and Pro/E is no longer available.
JHG
Search Google. There are some nasty links out there, altought they do not appear to be recent.
If you are looking for Free Software CAD, check out Qcad at Ribbonsoft. I would not want to run Qcad professionally, but it is adequate for CAD work for you own home renovations.
If you are willing to spend money, VariCAD is available, and is supposed to be quite good.
If you are willing to spend a lot of money, UGS is available for Linux, and Pro/E is no longer available.
- Status