KieranSean
Mechanical
Does any one have any idea about changing the line weight in drafting?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Line weight in drafting
- Thread starter KieranSean
- Start date
- Status
Do you want to change an individual line (select the line and you should see options in the ribbon at top of screen) or permanently change all the lines of a line style (format, style, select line in the top left box and away you go)?
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
PatCouture
Mechanical
In SE ST2 in the view tab click on styles and there you have a pulldown menu where you can select line and then you can edit the width of each line type.
If you have V20 or below look for the menu format if I remember right.
Hope it helps.
Patrick
If you have V20 or below look for the menu format if I remember right.
Hope it helps.
Patrick
- Status
Similar threads