Limit to Design Table 1

[gross01]

Hello Users:

Is there a limit to the number of configuration that can be displayed on a drawing in a design table.
My table will not display past line 62.
When I stretch the bottom past line 62 close the table it reverts back to line 62.
Is anyone else experiencing this?

-Caper-

 

[SBaugh]

Are you editing in a separate window?

If not you should be. Excel DT are only limited to what Excel offers you in the full version.

Regards, Scott Baugh, CSWP
3DVision Technologies
credence69@REMOVEhotmail.com

http://www.3dvisiontech.com

http://www.3dmca.com

*When in doubt always check the help*

 

[berlitz]

This is a general problem with embedded OLE objects. Sometimes you can get some more lines (or columns) if you choose smaller font sizes in your table.

For more informations on that issue please take a look at

OFF97: Excel Objects Appear Truncated

http://support.microsoft.com/support/kb/articles/Q189/2/79.ASP

Large Embedded Object Is Cropped When Pasted into Word

http://support.microsoft.com/support/kb/articles/Q111/7/48.asp

Sorry, that I couldn't help but at least you know WHY there's this issue.

Stefan
--
unofficial german SolidWorks helpsite

http://solidworks.cad.de

tools and programs for SolidWorks

http://swtools.cad.de

 

[gross01]

I reduced the font from 10 to 7 and that did the trick

thanks berlitz

 

[SBaugh]

Hello....I need to learn to read...You said drawing I was thinking part or assembly DT.

LOL Scott Baugh, CSWP
3DVision Technologies
credence69@REMOVEhotmail.com

http://www.3dvisiontech.com

http://www.3dmca.com

*When in doubt always check the help*