Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Limit State Design of Retaining Wall?

Status
Not open for further replies.

sdz

Structural
Dec 19, 2001
567
Does anyone know a good reference for limit state design of retaining walls?
 
Replies continue below

Recommended for you

sdz,

There are ASD and LRFD methods, depending on the wall type. I'm sure that you could perform LSD checks on various elements, but I can't recall a coherent LSD approach for the geotechnical side of things.

Jeff
 
csd72, yes I have downloaded that and it is useful. I am also looking for textbook type references.
 
I doubt you will find any.

Good luck.

csd
 
Prof Mick Pender of Auckland University NZ has run courses with good notes on Limit State design. Try contacting him via the Uni, though I'd heard he was on sabbatical. Still e-mails should be passed on.

Gareth Williams
Geotechnical Engineer,
Auckland New Zealand
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor