Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lighting ballast load factor

Status
Not open for further replies.
swiminelectricity

swiminelectricity

Electrical
Mar 8, 2005
33
Hi, Guys,

Who knows where we can get relatively accurate information about ballast loads when it comes to the lighting design calculations.Thanks a lot in advance.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Depends on the wattage and light source in question, is it for street /highway lighting?!? If so....


100W SONT = 0.74A
250W SONT = 1.4A
400W SONT = 2.11A
600W SONT = 3.1A


This type of info is always murder to find on Manufacturers websites....
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Leosaldanha
  • Locked
  • Question
Special cars loaders for metal silicon furnace operations
Replies
0
Views
607
Leosaldanha
Leosaldanha
richanton
  • Locked
  • Question
Parking Area Lighting - Replacements for Metal halide Bulb
Replies
5
Views
275
IRstuff
IRstuff
PierreCaron
  • Locked
  • Question
Lighting standard for a dog park
Replies
2
Views
370
bridgebuster
bridgebuster
katwalatapan
  • Locked
  • Question
Building exterior lighting query
Replies
1
Views
153
IRstuff
IRstuff
Skogsgurra
  • Locked
  • Question
Lighting technologies?
Replies
9
Views
305
WoodrowJWeen
WoodrowJWeen

Part and Inventory Search

Sponsor

Back
Top Bottom