Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Library Features not working?
- Thread starter hisrik
- Start date
Can you provide some more background on your problem? Is SP1.1 when you started using '08? Do you receive an error message? Does it happen with any library feature?
Jeff Mirisola, CSWP
Certified DriveWorks AE
Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M
Jeff Mirisola, CSWP
Certified DriveWorks AE
Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M
- Thread starter
- #3
On this particular computer 1.1 is when I started using 08. However, I installed 08 SP0.0 on one of the other computers in my department and the library features work just fine. We have been using these library features for the past 4 years in SW.
Mechanical Engineer
Mechanical Engineer
I use library features in SW08, SP1.1 with no issues.
FWIW,
Anna Wood
SW 2007 SP4.0, WinXP
Dell Precision 380, Pentium D940, 4 Gigs RAM, FX3450
FWIW,
Anna Wood
SW 2007 SP4.0, WinXP
Dell Precision 380, Pentium D940, 4 Gigs RAM, FX3450
- Thread starter
- #5
Sounds like it's time to uninstall/reinstall...
Jeff Mirisola, CSWP
Certified DriveWorks AE
Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M
Jeff Mirisola, CSWP
Certified DriveWorks AE
Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M
jobiewan99
Mechanical
I just went through this... Swx crashing when dragging a lib feature onto a surface... My VAR walked me through registering the msflxgrd.ocx file and all was well again.
Granted, this was SWX 2007 5.0, but it sounds like a very similar situation.
Solidworks 2007 SP5.0
2GB Ram/3GB Switch
Quadro FX1300
P4 3.40GHz Duo XP Pro SP2.0
Granted, this was SWX 2007 5.0, but it sounds like a very similar situation.
Solidworks 2007 SP5.0
2GB Ram/3GB Switch
Quadro FX1300
P4 3.40GHz Duo XP Pro SP2.0
- Thread starter
- #8
Jeff,
I unistalled and re-installed 3 times. My VAR walked me through resetting the registry, completely cleaning the system out and installing SW all over and we still have a problem on that computer. so, my VAR is looking into it.
Mechanical Engineer
I unistalled and re-installed 3 times. My VAR walked me through resetting the registry, completely cleaning the system out and installing SW all over and we still have a problem on that computer. so, my VAR is looking into it.
Mechanical Engineer
CorBlimeyLimey
Mechanical
Was the anti-virus disabled during installation?
Are you using the same install disk for both computers?
Can you swap components (graphics card, RAM, CPU) between computers?
What are the differences between computers? (all installed software and hardware)
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Are you using the same install disk for both computers?
Can you swap components (graphics card, RAM, CPU) between computers?
What are the differences between computers? (all installed software and hardware)
- Status
Similar threads
- Locked
- Question