Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Legs welded to bottom head

Status
Not open for further replies.
Sort by date Sort by votes
mw87, if the head will take the load applied by the leg, and / or the head and legs are not dissimilar materials, you may be able to omit the pad.

Regards,

Mike

The problem with sloppy work is that the supply FAR EXCEEDS the demand
 
Upvote 0 Downvote
Pad shall be avoided for design temperature <-10ºC or > 450ºC.

Regards
r6155
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Seamless Flat head fillet welded to a seam less shell - Joint Efficiency
Replies
0
Views
638
engineerindisguise
E
Vessel-SA
  • Question Question
nozzle-head PWHT
Replies
14
Views
15K
Trestala
Trestala
jrcan
  • Locked
  • Question Question
Moss method to determine horizontal load distribution Vn for vessel supported by legs.
Replies
2
Views
3K
Trestala
Trestala
M
  • Question Question
Forming of PV welded parts
Replies
6
Views
3K
r6155
r6155
L
  • Locked
  • Question Question
Flat head calculations
Replies
0
Views
925
Lukas_1990
L

Part and Inventory Search

Sponsor

Back
Top