Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Left Turn Phase calcs from MODOT EPG

Status
Not open for further replies.

Lauryn Ash

Civil/Environmental
Jun 25, 2018
1
US
I'm trying to understand the calculations for capacity criteria for Permissive-Only and Protective/Permissive Left turns that are given in the Missouri Dept of Transportation EPG. In section [902.5.23 Signal Indications for Left-Turn Movements – General (MUTCD Section 4D.17)] where the Permissive Only and Protective/Permissive left turn calcs are under "Capacity Criteria" it shows VLT+VO<600x(gp/cp) and (VLT)pp+VO,1200x(gpp/cpp). Where do the numbers 600 and 1200 come from? What are these numbers representing?

I work in a smaller city and am wondering if I can scale these calculations to better fit the capacities I'm studying. So knowing what these numbers are for will help me determine if I can scale.

Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top