Learning to add Rev table

[EngJW]

Is it correct that you have to use annotations/note to fill in the description?

Can you change the rev letter and date? Say the old drawing was on paper at Rev C and you want to start the new SW drawing at Rev D. Or I want to change to tomorrows date instead of today.

Thanks

 

[ctopher]

Add the rev table, dbl-click on text to change it.
See "SW Help".

Chris
Systems Analyst, I.S.
SolidWorks 06 4.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 06-21-06)

 

[EngJW]

Thanks Chris. I had been right clicking, which works for sections, but everything is fine now.