Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LEAN DESIGN
- Thread starter AndrewUK
- Start date
I/m not sure what Lean Design is but if it involved the practice of DFMA (design for manufacturing & assembly) contact these guys for a system to get you going.
jck26
jck26
Here is another good link.
This is a pretty good toolbox of useful ideas and tools used in "Lean Product Development". We have implemented some of these in my corporation and they work. Being in the manufacturing environment it is amazing how much waste management wants to trim at our level when in fact most of the waste is created in the design process itself.
Hope it helps...
BTW... The books are helpful too.
joejack7
Mfg. Engineer
"Fighting the 'Good' Fight"
This is a pretty good toolbox of useful ideas and tools used in "Lean Product Development". We have implemented some of these in my corporation and they work. Being in the manufacturing environment it is amazing how much waste management wants to trim at our level when in fact most of the waste is created in the design process itself.
Hope it helps...
BTW... The books are helpful too.
joejack7
Mfg. Engineer
"Fighting the 'Good' Fight"
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question