ocpike102
Mechanical
- Oct 29, 2008
- 12
I'm a fairly new mechanical/process engineer, and I have just a few questions. I'm working for an air-cooled heat exchanger manufacturer, I'll keep that one to myself, and we've recently got into the world of process cooling. I'm using HTRI to design my coolers and I take the process data from chemical engineers, and then size the appropriate cooler for temp, heat load, phase, pressure drop, etc etc.
I just have a quick question for all of you experts here. I've been seeing a lot of Lean Amine and Propane coolers, are there any things that I should keep in mind when designing these coolers, such as certain fluid velocity or anything that I'm not thiking of. Any advice would be greatly appreciated.
I just have a quick question for all of you experts here. I've been seeing a lot of Lean Amine and Propane coolers, are there any things that I should keep in mind when designing these coolers, such as certain fluid velocity or anything that I'm not thiking of. Any advice would be greatly appreciated.