Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Laser cutting carbon-filled PEEK

Status
Not open for further replies.
Wktrex

Wktrex

Mechanical
Jun 14, 2007
3
Does anyone have any experience laser cutting carbon particulate filled PEEK. I am trying to cut tubing with an 0.065 wall.
 
Status
Not open for further replies.

Similar threads

Garrett Green
  • Locked
  • Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
Hans H.
  • Locked
  • Question
Anti spatter for laser cutting?
Replies
1
Views
899
Rex Hang
Rex Hang
D
  • Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
M
  • Locked
  • Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
Pablo_Garcia
  • Locked
  • Question
Seeking Guidance: Choosing the Right Laser Cutting Machine for Beginners
Replies
0
Views
824
Pablo_Garcia
Pablo_Garcia

Part and Inventory Search

Sponsor

Back
Top Bottom