Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Laser Alignment
- Thread starter conner
- Start date
It pays to have any motor ( new or rebuilt) aligned at installation time. Unless I've missed something the lazer is just a tool to make it easier. It can and has been done with other tools ( piano wire, dial indicators transits etc. ) for years.
The tools are important but the skill of the craftsman doing it is the more critical element in the job.
The tools are important but the skill of the craftsman doing it is the more critical element in the job.
hi all
as usual bjc has summed up neatly. always alignment will be needed
But to add my twopenneth worth.
What sort of motor and application and what cost to align. Is it a 5kW 900 rpm sludge pump with rubber coupling and a cost of $1000 to align?
( 6" rule will do that one)
Or a 500Kw 2400 rpm multistage hp transfer pump 10m long. Get the laser.
I'm not trying to be smart or put anyone down but as with the rest of our lives it always seems to be "cost trade off" ( now where can I get a new Merc for $500?)
my mentor's rule was "whats the cost of the task not being correct? "
Regards Don
as usual bjc has summed up neatly. always alignment will be needed
But to add my twopenneth worth.
What sort of motor and application and what cost to align. Is it a 5kW 900 rpm sludge pump with rubber coupling and a cost of $1000 to align?
( 6" rule will do that one)
Or a 500Kw 2400 rpm multistage hp transfer pump 10m long. Get the laser.
I'm not trying to be smart or put anyone down but as with the rest of our lives it always seems to be "cost trade off" ( now where can I get a new Merc for $500?)
my mentor's rule was "whats the cost of the task not being correct? "
Regards Don
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question