Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lab design for trace metal testing

Status
Not open for further replies.
answerhunter

answerhunter

Mechanical
Joined
Dec 23, 2004
Messages
1
Location
US
Recommended design standard parameters for labs performing trace metal testing in water? Mainly, what air change rates should be maintained in ISO Class 7 (10,000) spaces, and would less stringent classifications be sufficient for the needs of trace metal testing?
 
Status
Not open for further replies.

Similar threads

Helepolis
  • Question Question
Standard for keys and keyways/keyseats design (Aircraft)
Replies
8
Views
8K
EdStainless
EdStainless
R
  • Locked
  • Question Question
Hole Design for mating parts.
Replies
12
Views
4K
mfgenggear
mfgenggear
Flying Whale
  • Question Question
Movable-shaft design for adjustable gear teeth engagement
2
Replies
21
Views
6K
mfgenggear
mfgenggear
M
  • Locked
  • Question Question
drive design for grinding machine
Replies
9
Views
3K
CWB1
CWB1
fortjp500
  • Locked
  • Question Question
Square captured nuts in sheet metal
Replies
5
Views
2K
fortjp500
fortjp500

Part and Inventory Search

Sponsor

Back
Top