Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Koyo Direct Logic 450 PID CoProcessor

Status
Not open for further replies.
edsparks

edsparks

Electrical
Joined
Jan 30, 2004
Messages
4
Location
US
We are considering using the Koyo 450 with PID CoProcessor for a large scale temperature control project (thermoplastic co-extruder).

If you've had any experience with the Koyo and CoProcessor, I'd be interested to hear what you think of it as a control system; both in setup/programming, and performance.

-Thanks
 
Status
Not open for further replies.

Similar threads

506818
  • Locked
  • Question Question
Multiple PID Loops (PLC)
Replies
3
Views
1K
xnuke
xnuke
MKattes
  • Locked
  • Question Question
Studio 5000 Logic Saved Scale Data Change
Replies
1
Views
442
thebard3
thebard3
RPosty
  • Locked
  • Question Question
Direct Logic 205 PLC controlling a stepper motor to be controlled by an Analog Voltage
Replies
2
Views
451
itsmoked
itsmoked
elfman
  • Locked
  • Question Question
AutomationDirect C-more & Directsoft 6 conversion issue
Replies
2
Views
405
itsmoked
itsmoked
elfman
  • Locked
  • Question Question
DirectSOFT 6 Programming help needed
Replies
1
Views
502
itsmoked
itsmoked

Part and Inventory Search

Sponsor

Back
Top