Knowledge Fusion in Library

[CADsicle]

I was asked to change our spreadsheets for screws to include SUPPLIER=STD or STOCK basically telling purchasing if the component is in STOCK or not. The only issue I’m having is with the AUTO screws. As shown in the pictures I just separated the length list by line so I could call out specific screws and lengths to be STOCK or STD, but the screw no longer auto sizes and now wants to pick a screw length. This method worked for all other spread sheets except this one.
Do you know why it’s doing this or how I can fix it? I believe it has something to do with the Knowledge fusion. This is from the standard DME library.

Thanks for any help anyone can offer.