Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Klockner Moeller Easy819-DC-RE

Status
Not open for further replies.
PLCwantaBe

PLCwantaBe

Industrial
Joined
Nov 6, 2009
Messages
4
Location
US
Does anyone know if there is a MOVE command on the PLC to move a number into a instruction, just like in RSLogix?
 
Sort by date Sort by votes
I have never seen a "MOVE" command on a PLC, but every PLC I've ever worked with has a "Copy" command, although some call their "COPY" command "MOVE".
BTW, which PLC are you referring to?
 
Upvote 0 Downvote
The PLC I am referring to is a Klockner Moeller
Easy819-DC-RE and I am using the EasySoft6 software. I want to move a number value into a comparator instruction.
 
Upvote 0 Downvote
Oops sorry, I should have read the subject line. :)
BTW, you have my permission to move those values.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

HydroBuff
  • Locked
  • Question Question
Remote PLC Updates and Diagnostics Via Ethernet
Replies
0
Views
958
HydroBuff
HydroBuff
Faisal max
  • Locked
  • Question Question
Regarding TEM -1 , CPU-1 for MWM gas generator
Replies
4
Views
9K
Kjaman
K
RyreInc
  • Locked
  • Question Question
High density RTD/resistance input cards
Replies
5
Views
615
danw2
danw2
Indy
  • Locked
  • Question Question
Inter posing relay
2
Replies
25
Views
1K
RedSnake
RedSnake
Mehboob Ali
  • Locked
  • Question Question
ZA READ TELEGRAM at MWM
Replies
2
Views
596
Hoxton123
Hoxton123

Part and Inventory Search

Sponsor

Back
Top