I do not have a DMU Kinematic package but I notice in the Assembly workbench there are Kinematic constraint tools. How do I annimate a kinmatic model constructed in this way? When I use the compass my product acts as though the parts are unconstrained and moves only 1 part
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Kinematics in Assembly work bench 1
- Thread starter britguy
- Start date
-
1
- #2
You can use the MANIPULATION tool to get 'fake' kinematic motions from the Assembly Design workbench by manually dragging the input motion. Make sure you activate the option "with respect to constaints"
You can also 'fake' kinematics with Sketcher if you have a 2D mechanism and are willing to work with stick figures (free-body diagrams) instead of solids
You can also 'fake' kinematics with Sketcher if you have a 2D mechanism and are willing to work with stick figures (free-body diagrams) instead of solids
- Status
Similar threads
- Locked
- Question