Just a broken image from the old IBM Dassault site circa 2001 1

[KevinDeSmet]

 

[drewmumaw]

@KevinDeSmet
Thanks for the walk down memory lane...

Drew Mumaw

http://www.textsketcher.com

http://www.drewmumaw.com

 

[KevinDeSmet]

I know this post is shit, but at least it beats all the threads about macro's

 

[jackk]

Kevin,

If you're so against macros, I'm curious how you add a frame and titleblock to your drawings?

 

[drewmumaw]

@KevinDeSmet
I wasn't being a smart-aleck, I use [URL unfurl="true"]https://archive.org/web/[/url] from time to time too.

As far as the macro issue goes, I agree. There used to be sites out there that differentiated macros from drafting, admin, part design, surfacing, sheetmetal etc.

http://www.3dcadforums.com/catia-forum/

and

http://www.catiav5forum.de

and

http://www.coe.org

but most forums seem to be abandoned after awhile. I might start my own dedicated to only macros in order to keep things separated...

Drew Mumaw

http://www.textsketcher.com

http://www.drewmumaw.com

 

[KevinDeSmet]

Jack,

The solution to that question is that it should be in the software out-of-the-box. But it isn't because most companies using CATIA let their PLM system generate the titleblocks and frames.

 

[ferdo]

It can be done also without macros...like many other things...but...still, I'm to lazy to give more clicks, I prefer less .

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

- Romania

https://picasaweb.google.com/103462806772634246699/

- EU