Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Jurisdiction

Status
Not open for further replies.
DCMV

DCMV

Petroleum
Joined
Nov 5, 2011
Messages
35
Location
US
What Jurisdiction whould driving piling for Dock plateform, what code would the piling be under and what code would the structure be covered under.
 
Sort by date Sort by votes
Come on DCMV, throw folks a bone and at least say where in the world the Dock is.

Not sure this is the best forum for this kind of question either but good luck.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​
 
Upvote 0 Downvote
I'm sorry we are will be adding a new dock at a refinery in orange Texas. We will drive in pipe pilings to water floor and tie in with structure beams.
 
Upvote 0 Downvote
Ask the Refinery and or the Engineer of Record. If they do not respond, then go to US DOT and the US Coast Guard (now under FEMA).
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top