Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Joint Efficiency Weld Factor for API-5L PSL-1 and PSL-2
- Thread starter jcaine
- Start date
API 5L is a materials specification and so does not list joint efficiency.
You will need to look in a design code such as ASME B31.3 or API 31.8, or a regulatory code such as DOT Part 192. The joint efficiency will depend on the type of weld so not all API 5L PSL 1 or PSL 2 pipe will have the same joint efficiency.
You will need to look in a design code such as ASME B31.3 or API 31.8, or a regulatory code such as DOT Part 192. The joint efficiency will depend on the type of weld so not all API 5L PSL 1 or PSL 2 pipe will have the same joint efficiency.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question