join the curves

[marjun]

i need to join the two curves those skheched in the same plane.or diff plane



any idea?

 

[xcad]

hello



create a curve through points (select the ends of the two curves you have)

then Tangency > define, start and the end point



xcad

 

[akraitzer]

Joining curves may be done using Datum Curve- Composite-> Exact.

 

[cdobresc]

Create points On Curve (Length Ratio or Actual Len) for control joint position -> create curve Thru Points -> choose tangent condition -> create new jointed curve with composite...