Jog Lines

[Scorch]

I have an exploded assy drawing using jog lines to show construction of the assy. I have a need for detail view that just happen to include some of the jog lines. Is there a way to hide the jog lines in the detail view? I searched the forum and looked in the help, but no help at all. The jog lines just clutter up the detail view and get cut off at the edge of the detail circle so there is no need to view them in the detail view.

Don't worry about people stealing your ideas. If your ideas are any good, you'll have to ram them down people's throats.
--Howard Aiken, IBM engineer

 

[SBaugh]

So are you saying when you make a Detail from the view you can a line that connects the Area of the detail to the detail view itself?

If so, try setting that within the Detail properties in the Property manager when you pick the view.

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users