Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

JIS 10K flange for Pressure Vessel

Status
Not open for further replies.
akonsayagyi

akonsayagyi

Mechanical
Joined
Sep 9, 2013
Messages
1
Dear members,

I am designing 26in I.D pressure vessel and i need a flange at the top. Can i used JIS 10K flange instead of ASME B16.47 Series A? If i use JIS flange, can i still get U-Stamp??

Thanks a lot.

Akon
 
Status
Not open for further replies.

Similar threads

Fat Tony
  • Question Question
Max allowable pressure drop for control triple eccentric butterfly valves
Replies
5
Views
5K
Fat Tony
Fat Tony
E
  • Locked
  • Question Question
Selection of solenoid valve for high pressure and high temperature spray experiment
Replies
0
Views
1K
ethan-111
E
EngTal
  • Question Question
Gland becomes brittle and porous in High Pressure NH3 service
Replies
1
Views
6K
Danlap
Danlap
Ram55
  • Locked
  • Question Question
Pressure reducing valve testing
Replies
2
Views
3K
Ram55
Ram55
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567

Part and Inventory Search

Sponsor

Back
Top