Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

JHB Model Parameters for 99.5 % Alumina

Status
Not open for further replies.
haseeb99b

haseeb99b

Mechanical
Joined
Nov 30, 2016
Messages
15
Location
PK
I am working on a high speed impact on 99.5 % Alumina using JHB model. Is there any research paper of link from where I could find the JHB model constants for 99.5 % Alumina?? All I could find were JH-2 parameters.
 
Sort by date Sort by votes
Johnson Hlomquist Bissel Damage Model... Used for the high speed impact on brittle materials.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
M
  • Locked
  • Question Question
Material model for plain weave in ABAQUS
Replies
4
Views
2K
Materials Freak
M
abc123ali
  • Locked
  • Question Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way
ruzfactor
  • Locked
  • Question Question
Convergence issue for a model with driver nodes
Replies
3
Views
521
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top