Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Jack-in steel H-pile

Status
Not open for further replies.
fotan

fotan

Geotechnical
Joined
May 4, 2001
Messages
2
Location
GB
Dear all,

I am looking for some job reference or technical paper on Jack-in pile (especially for steel H-pile) such as method of installation and acceptance criteria. I have got the relevant information from BS 8004 Clause 7.4.6.3.1. only at the moment.

Thanks in advance!

Fotan
 
Sort by date Sort by votes
If you refer to vibratory driving you have a section on it on Bowles' Foundation Analysis and Design 5th ed p. 972...otherwise you will have to take reaction of the jack against something that is not harmed by the process.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jochav52802
  • Question Question
Pile-to-Pile Cap Lateral Shear Breakout Calculation
Replies
3
Views
641
HTURKAK
HTURKAK
pelelo
  • Question Question
Auger cast pile with no rebars
Replies
8
Views
8K
dik
dik
Boiler106
  • Question Question
Augercast Pile Minimum Diameter for stability
Replies
4
Views
3K
ANE91
ANE91
killswitchengage
  • Locked
  • Question Question
The suitable technology of pile installations
Replies
0
Views
3K
killswitchengage
killswitchengage
Prairie Boy
  • Locked
  • Question Question
Helical pile failure - boathouse in cold climate
Replies
1
Views
744
bones206
bones206

Part and Inventory Search

Sponsor

Back
Top