Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

J1926 engineering data

Status
Not open for further replies.
smokehouse

smokehouse

Mechanical
Joined
Mar 27, 2002
Messages
59
Location
US
Hello,

Does anyone have the data for the construction of the male end of the J1926 fitting with a 3/4-16 thread? The back end of the thread where the 0 ring goes is the unknown.

Thanks
Smokehouse
 
Status
Not open for further replies.

Similar threads

I
  • Question Question
OEE at 75% for dairy processing with 6 data analysts.
Replies
0
Views
6K
Industrial AI guy
I
Manu Mathen Mathew
  • Locked
  • Question Question
Substitute engineering plastic material for pump vanes
Replies
3
Views
350
btrueblood
btrueblood
Eithan.T
  • Locked
  • Question Question
Fresh Manufacturing Engineering position !
Replies
11
Views
642
Eithan.T
Eithan.T
Rizkyffq
  • Locked
  • Question Question
Do we need issue ECN (Engineering Change Notice) towards updated Material Spefication ?
Replies
6
Views
605
CWB1
CWB1
Erewhon69
  • Locked
  • Question Question
Driving Work Instructions Content from Design Engineering
Replies
6
Views
337
blucas1
blucas1

Part and Inventory Search

Sponsor

Back
Top