IUA EXECUTABLE

[gontxal]

I got from my_iua.f the compiled my_iua.o¿How can I get the Catia executable file MY_IUA?

 

[czins]

Hallo,

make a little script eg. test.sh with the following content:

shared -p mysub1.o mysub2.o csystem.o -o /prog/v4load/myiua

Best Regards
Stefan

 

[gontxal]

Thank you Stefan,

but I have a problem,where should I execute the script?,because I've done it in the path where I have my_iua.o,and I can not find shared "command" in the Fortran path either :

shared -p my_iua.o
-o /iua_path/my_iua

when I execute the scrcipt the system can not find shared,
Am I missing any file?

Thank you for your help.

 

[czins]

Hello gontxal,

it is important that you do your programming as a catia user with the the correct PATH and LIB settings (YOUR.env)

Best Regards
Stefan

 

[gontxal]

Hi Stefan,

I have done it as you say and I get this message:

api: ==== Creating a shared load ===

Compiling C source of module header ... error
/usr/catia4241/cfg_bhase/code/bin/lkcat[374]: cc: not found
==========================================

PROCESS INTERRUPTEED
Stopped at 14:59:12
==========================================
I guess I'm missing some packets of C compiler.

Do you know what should I install in my computer?

thanks a lot

 

[czins]

Hello gontxal,

you need for the linking a C-compiler. The standard IBM C-compiler needs a license and is in the directory:
/usr/ibmcxx/bin

You have to add this directory to your path.
If you want to use a GNU C-compiler you have to try. I have no experience with it.

Good luck !
Best regards
Stefan

 

[gontxal]

Thanks a lot Stefan!
I have installed IBM C for AIX and It gets to compile but it does´nt create the load module giving this error:

===== Creating a shared load ====
Compiling C source of module header... ok

Creating load module... error
ld: 0711-224 WARNING: Duplicatesymbol:_system_configuration
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
ld: 0711-317 ERROR: Undefined symbol: p_xargc
ld: 0711-317 ERROR: Undefined symbol: p_xargv
==============================================
PR0CESS INTERRUPTED

Stopped at 19:37:47
==============================================
Do you know what I am doing wrong?

Thank you

 

[czins]

Hello gontxal,

you have listed all subroutines in your link script ? Perhaps you have code in C where you have to add the apropriate Library ?

shared -p mysub1.o mysub2.o csystem.o -o /prog/v4load/myiua
-a /usr/lib/libC.a

Regards
Stefan

 

[gontxal]

hello Stefan,
I just have one code file and I have the link script as follows:

shared -p MYIUA.o -o /prog/v4load/MYIUA
and I modified it this way:

shared -p MYIUA.o -o /prog/v4load/MYIUA
-a /usr/lib/libC.a
I get the same results as before and
link_script.sh[3]: -a: not found.

 

[czins]

Hello gontxal,

my fault:

shared -p mysub1.o mysub2.o csystem.o -o /prog/v4load/myiua -a /usr/lib/libC.a

use a backslash after myiua.

By the way, which version of Fortran and C do you use ?

Sorry and regards
Stefan

 

[gontxal]

Hi Stefan,

Thanks a lot for your help, I've done it as you say but I got the same error:

ld: 0711-224 WARNING: Duplicate symbol:_system_configuration
ld: 0711-345 Use the -bloadmap or -bnoquiet optinon to obtain nore information.
ld: 0711-317 ERROR: UNdefined symbol: p_xargc
ld:0711-317 ERROR: Undefined symbol: p_xargv

I've got installed Fortran 5.1 and IBM C for AIX 5.0

 

[czins]

Hello gontxal,

my installation is:

xlfcmp 5.1.1.0 C XL Fortran Compiler
xlC.cpp 4.3.0.1 C C for AIX Preprocessor

perhaps you can try this combination, if available. It is on the CD:
RS/6000 Operating Environment for CATIA
Version 2.2

I think that is my last idea.

Good luck again and regards
Stefan

 

[gontxal]

I haven`t got to get the CD yet,but anyways I really appreciate your help Stefan.