Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ith and Idyn for protection relays

Status
Not open for further replies.
farale

farale

Electrical
Apr 7, 2018
36
Dear All-
What are normal values for Ith (thermal current) and Idyn (dynamic current) of protection relays?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You need to refer to manufacturer’s manual of that relay as there is no fixed values
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question
TiDL protection relays
Replies
1
Views
2K
thermionic1
thermionic1
DrDrreeeaaa
  • Question
Testing Procedures - Transformer Protection, Bus Zone Protection, Feeder, Reactor
Replies
0
Views
3K
DrDrreeeaaa
DrDrreeeaaa
NickParker
  • Locked
  • Question
Sychro check relays for short term paralleling
Replies
3
Views
411
FacEngrPE
FacEngrPE
Emad Shaaban
  • Question
ALSTOM MX3VIR016A PROTECTION RELAY PROGRAME
Replies
1
Views
3K
Gr8blu
Gr8blu
G
  • Question
Generator Protection - Selection of Fuse based on Sustained Current
Replies
9
Views
6K
wcaseyharman
wcaseyharman

Part and Inventory Search

Sponsor

Back
Top Bottom