Mar 4, 2009 #1 S sacarlos Guest I have done a basic simulation which consists on a chip (10W) over a board at 25
Mar 11, 2009 Thread starter #2 B bchapman Guest Use the thermal properties of G10 fr4 fiberglass PCB material. If you need the data use matweb. The thermal properties I have for g10 are: Thermal Conductivity 0.288 W/m-K 2.00 BTU-in/hr-ft
Use the thermal properties of G10 fr4 fiberglass PCB material. If you need the data use matweb. The thermal properties I have for g10 are: Thermal Conductivity 0.288 W/m-K 2.00 BTU-in/hr-ft