Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Issue on using two subroutines

Status
Not open for further replies.
bbah123

bbah123

Materials
Joined
Jul 6, 2020
Messages
3
Location
DE
Hello everybody,

i am using two subroutines "USDFLD" and "UMATH" and i use the stress from "USDFLD" as a state variable to "UMATH". After finishin "UMATH" somehow my statevariable is again 0 but i want to keep it in order to have the stresses in all my integration points. I hope somebody can help. I have attached my subroutine.

Best regards
 
 https://files.engineering.com/getfile.aspx?folder=59886094-c9b7-44ce-a154-e7bf7ad1d4b2&file=umathtxx_usd.for
Status
Not open for further replies.

Similar threads

nilesh_dot
  • Locked
  • Question Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
1K
nilesh_dot
nilesh_dot
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
SinaPeugeot
  • Question Question
Applying contact pressure between two parts
Replies
2
Views
12K
SinaPeugeot
SinaPeugeot
D
  • Locked
  • Question Question
Memory Allocation Issue
Replies
3
Views
3K
Daniel_LEE
D
IcarusAero223
  • Locked
  • Question Question
3D composite coupon convergence issue
Replies
5
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top