Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO/TS 16733 Event Tree Analysis and scenario selection 1

Status
Not open for further replies.

Ciaci

Mechanical
Joined
Jul 11, 2015
Messages
66
Location
IT
I am trying to understand how, once all the branches of the Event Tree Analysis are defined, it is possible to decide if a fire scenario should be analysed with a simulation. I don't know an 'a priori' criterion to quantitatively assess the damage (deaths or money), and I don't know which probability should be the threshold to discard a scenario labelling it as "not credible". I don't have the ISO/TS 16733, but I found some reports and books citing this code.
Do you know which is the criterion to select a scenario to assess its consequence with a numerical calculation or to discard it?
 
You are not going to get through this or any other risk assessment without making judgement calls. Hopefully it's someone with experience making those judgements, who can explain the rationale behind them.

It would sure help if the rest of us knew what sort of "fire" you are envisioning here.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top