Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO question (CZ and UZ)

Status
Not open for further replies.

Andera

Mechanical
Joined
Jan 21, 2019
Messages
58
Location
US
Is it legal to use CZ and UZ in the same feature control frame (for profile or position) ? I searched for specific examples with no lack of finding any.
(ISO 1660, ISO 5458, ISO 1101, or others)

If okay, how the feature control frame would look like

Profile| 3 UZ -1 CZ| A|B|C|
or
Profile| CZ 3 UZ -1 CZ|A|B|C|


Position for a plannar surface
3X Position|0.5 UZ -1 CZ|A|B|
or
3X Position |CZ 0.5 UZ -1|A|B|

Thanks
Andras
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top