Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO/DIS 21011 & TC 153 for Valves Cryo-Testing

Status
Not open for further replies.
NGiLuzzu

NGiLuzzu

Mechanical
Joined
Dec 17, 2002
Messages
558
Location
RO
Please refer to thread408-148535 within the "Valve Engineering Forum" of this site.

Is anybody aware of the latest developments?

Thanks to all, 'NGL
 
Status
Not open for further replies.

Similar threads

I
  • Locked
  • Question Question
interpretation of unilateral tolerance defined with ISO standard
Replies
0
Views
2K
imanoj23
I
spray_arc
  • Locked
  • Question Question
ISO 3834 and EN 1090 Certifications for EURCODE 3
Replies
3
Views
1K
kingnero
kingnero
O.Rezzik
  • Locked
  • Question Question
Clarification for ISO 6892 Annex E - E.2.2 Longitudinal or transverse strip
Replies
0
Views
779
O.Rezzik
O.Rezzik
spray_arc
  • Locked
  • Question Question
ISO 15614 Level 2 and ISO 9606
Replies
1
Views
1K
kingnero
kingnero
Ganeshrnair9
  • Locked
  • Question Question
ISO standard for welding procedure and welder qualification on Alu Zinc coated steel sheet
Replies
1
Views
1K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top