Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO 3506-1 fasteners and ASME B31.3

Thread starter HJS7
Start date Oct 7, 2016

Status: Not open for further replies.

Oct 7, 2016

HJS7

Mechanical

Good afternoon,

For piping with design code ASME B31.3 we usually use fasteners A2 or A4 according ISO 3506-1.
Unfortunately I cannot find the A2 and A4 steel grades in Tabel A-1M of the ASME B31.1.

Is there any link or interpretation about using materials A2 and A4 according ISO 3506-1 within the ASME B31.3 design code?

Thank you,

HJS