Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO 2768 again

Status
Not open for further replies.
KENAT

KENAT

Mechanical
Joined
Jun 12, 2006
Messages
18,387
Location
US
fcsincox has started a discussion on this tolerance standard over in "ISO Standards & Certifications". If anyone is interested in contributing please post over there.

thread182-247563

Please don't reply here.

KENAT,

Have you reminded yourself of faq731-376 recently, or taken a look at posting policies: What is Engineering anyway: faq1088-1484
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
ISO 8062 and ISO 2768 for one dimension
Replies
9
Views
14K
MintJulep
M
JMulasLopez
  • Locked
  • Question Question
ISO 2768-1 TOLERANCE FOR DIMENSIONS BIGGER THAN 4000 mm
Replies
8
Views
5K
Wuzhee
Wuzhee
kokerkov
  • Locked
  • Question Question
angular tolerance in ISO 2768-1 for sheet metal process
Replies
5
Views
1K
kokerkov
kokerkov
G
  • Locked
  • Question Question
Composite Position Equivalent in ISO or BS
Replies
5
Views
3K
pmarc
pmarc
Mech1595
  • Locked
  • Question Question
ISO GPS - Position of Surface to Datum A
Replies
3
Views
2K
greenimi
greenimi

Part and Inventory Search

Sponsor

Back
Top