Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is this a Standard Error?

Status
Not open for further replies.
MASSEY

MASSEY

Mechanical
Joined
Oct 17, 2002
Messages
179
Location
US
ANSI/AFBMA Std 11-1990 paragraph 5.1.1.1 states that when two Radial Roller Bearings are used in a combination they should be considered as one double row angular contact bearing.

What is it that I am not seeing here?
 
Status
Not open for further replies.

Similar threads

Tmoose
  • Locked
  • Question Question
ANSI Standard tolerances - B4.1 - but not just cylindrical fits
Replies
0
Views
989
Tmoose
Tmoose
ShlomoB
  • Locked
  • Question Question
Adding the same balloon multiple times in a drawing (ANSI)
Replies
3
Views
3K
ewh
ewh
Quality Improvement 1
  • Locked
  • Question Question
ANSI Standard requiring changing part number vs revision
Replies
3
Views
1K
looslib
looslib
fabeljafla
  • Locked
  • Question Question
API Source Inspector Electrical Equipment (SIEE) help ............
Replies
0
Views
947
fabeljafla
fabeljafla
Ken Mac Aulay
  • Locked
  • Question Question
Is DGS 8081 a Carbon Steel Casting?
Replies
0
Views
689
Ken Mac Aulay
Ken Mac Aulay

Part and Inventory Search

Sponsor

Back
Top