Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there a standard size?

Status
Not open for further replies.
Mooref2

Mooref2

Mechanical
Joined
Nov 14, 2008
Messages
6
Location
US
I was told to search for an extruded tube/pipe with an 8" dia. Is there a standard size for the ID or OD? I know it depends on the thickness, but is there a chart to view anywhere?

Thanks
 
Sort by date Sort by votes
You probably need to look at DOM (drawn over mandrel) pipe. Any steel supplier should have literature with available sizes.
 
Upvote 0 Downvote
What material is required? Are you looking for pipe or tube, or is only the OD important? What application? Help us to help you.
 
Upvote 0 Downvote
thank you all for the replies
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
I need a Class 1 division 1 approved cable gland for both USA and Canada. And at the end of the cable there is a Molex connector.
Replies
0
Views
1K
denuwan
D
oharag11
  • Locked
  • Question Question
Detail View - solid line vs phantom? What is standard?
Replies
7
Views
2K
jassco
jassco
Helepolis
  • Question Question
Standard for keys and keyways/keyseats design (Aircraft)
Replies
8
Views
8K
EdStainless
EdStainless
rmetzger
  • Locked
  • Question Question
partially threaded fasteners - is there a standard on thread length?
Replies
2
Views
1K
dvd
dvd
FrancoisY
  • Locked
  • Question Question
rated standard for HVAC relating leak test?
Replies
0
Views
1K
FrancoisY
FrancoisY

Part and Inventory Search

Sponsor

Back
Top