Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is AWS D17.1 -2001 replacing AMS-STD-1595

Status
Not open for further replies.
GraySyracuse

GraySyracuse

Materials
Joined
Feb 12, 2002
Messages
24
Location
US
Is AWS D17.1 -2001 replacing AMS - STD - 1595 (MIL - STD 1595) or is just an addition/duplication of requirements for the aerospace part manufacturers? I haven't seen anywhere any notes ( in the body of the spec) where this spec supersedes any other specs; (speaking with different welding experts, that what it was suggested).
I appreciate your answer.
Thank you
 
Status
Not open for further replies.

Similar threads

JT0202
  • Question Question
AWS D1.1 2020 Group I to Group II Material PQR
Replies
0
Views
2K
JT0202
JT0202
ThaiVu
  • Locked
  • Question Question
AWS D1.1 - FILLET WELD BREAK TEST
Replies
7
Views
3K
ThaiVu
ThaiVu
JONI101
  • Locked
  • Question Question
AWS D1.1 : 10.25.2 - Tubular Connection Requirement (RT acceptance criteria)
Replies
0
Views
1K
JONI101
JONI101
mr_inspectorpants
  • Locked
  • Question Question
AWS D1.1 Prequalified Essential Variables
Replies
3
Views
3K
gtaw
gtaw
Goose123
  • Locked
  • Question Question
When Is New WPS Required? AWS D1.5
Replies
4
Views
1K
Goose123
Goose123

Part and Inventory Search

Sponsor

Back
Top