Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
irf mosfets w/ drivers
- Thread starter vmfa251
- Start date
OperaHouse
Electrical
If I don't ask, someone else will. Is there any reason why you want to use a FET rather than a transistor. The application isn't fast or high current
Your question is like.....
"I need a car like a Porche 914T. Got any suggestions?"
I do not understand why you need help. ?
Use the IRF2804 it will work fine. You shouldn't need anything else. Hook it up exactly like figure 18a on IRF's data sheet. Replace Rd with your event timer coil. Run a 100kOhm from Vgs to ground just to be sure no leakage turns it on. Ta da!
Keith Cress
Flamin Systems, Inc.- - kcress@<solve this puzzle>
"I need a car like a Porche 914T. Got any suggestions?"
I do not understand why you need help. ?
Use the IRF2804 it will work fine. You shouldn't need anything else. Hook it up exactly like figure 18a on IRF's data sheet. Replace Rd with your event timer coil. Run a 100kOhm from Vgs to ground just to be sure no leakage turns it on. Ta da!
Keith Cress
Flamin Systems, Inc.- - kcress@<solve this puzzle>
- Status
Similar threads
- Locked
- Question