UnthoughtKnown
Structural
- Nov 18, 2010
- 11
IRC 2009 Table R404.1.2(1) requires one #4 cont. bar 12" from the top of the found. wall and one #4 bar near mid height of wall. This is for wall heights less than or equal to 8'.
My thought is that hor. bars in a foundation wall give the wall the ability to act as a grade beam to help bridge soft soils, etc. and to better distribute loads from above. This also helps crack control. But I've always thought rebar near the top and bottom of the found. wall is most effective, creating the larger d' distance (assuming that footing reinforcing and wall vertical rebar is not req'd).
Any thoughts on this specific requirement?
My thought is that hor. bars in a foundation wall give the wall the ability to act as a grade beam to help bridge soft soils, etc. and to better distribute loads from above. This also helps crack control. But I've always thought rebar near the top and bottom of the found. wall is most effective, creating the larger d' distance (assuming that footing reinforcing and wall vertical rebar is not req'd).
Any thoughts on this specific requirement?