Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Involutometry & Trigonometry

Status
Not open for further replies.
trallee

trallee

Mechanical
Joined
Feb 16, 2000
Messages
22
Location
US
I would like to get a copy of the book Involutometry & Trigonometry by Werner F. Vogel. Does anyone have this book and would like to sell it?
 
Sort by date Sort by votes
Not sure about buying a copy, but you may be able to find one to borrow by using inter-library loan at a public or academic library. I have found many old gear reference books this way.
 
Upvote 0 Downvote
Thanks fo the info. Ash is out of them so I will keep looking.
 
Upvote 0 Downvote
Another excellent book on this subject is "Gear Geometry And Applied Theory" by Faydor L. Litvin, ISBN: 0-13-211095-4. It's still available on Amazon.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

rollingcloud
  • Locked
  • Question Question
Is there a reason to have slightly different lead crowning on left & right flanks of external sp
Replies
8
Views
626
rollingcloud
rollingcloud
Ryan.z
  • Locked
  • Question Question
Why have big different between KissSoft & MITcalc???
Replies
1
Views
441
mfgenggear
mfgenggear
matts05
  • Locked
  • Question Question
Worm Gearset Design -- Pressure Angle & Tooth Bending Strength
Replies
4
Views
1K
spigor
spigor
mark512
  • Locked
  • Question Question
Gearbox sump & cover design resources
Replies
2
Views
405
romke
romke
binsky3333
  • Locked
  • Question Question
Hypoid Spiral Bevel Gear Force Math (tooth & bearing)
Replies
5
Views
1K
Gear Engineer
Gear Engineer

Part and Inventory Search

Sponsor

Back
Top