Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Invisible IGES

  • Thread starter Thread starter shaapala
  • Start date Start date
Status
Not open for further replies.
S

shaapala

Guest
Greetings fellow ProE users!



I'm currently modeling with the student version of proE. I currently have a 3ds skull converted into stl and iges. the stl will import fine, but not allow me to zip gaps or fix tangencies. The iges will import, shows up in the model tree, but never appears in the window. I was able to solidify the feature, but I still can't see it. Am I forgetting to do something? This skull is pretty crucial for my master's thesis.



Thanx,

shaapal
 
Shaapal:



Make sure the surfaces are not turned off in the layers menu.



Mike
 
If you got the skull from this web site, you will have to assign a color to each surface.

Give that a try.

Texaspete.
 
yeah, check the layers! Some softwares can enable at iges export, the propriety blank or unblank geometry. For that reason u can see.

OR somebody skip the geometry/layer at export
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top