Inview display and classic plc5/25

[cjmagm]

Hello Iam new to here so in advance the help is appreciated
I am having some difficulty getting an inview display setup.
there are no ascii string files in the 5/25.So I figuired i could use integers or something else,not to sure? I went to the rockwell site and on knowledgebase they have a couple files that should help with what i need but i cant seem to open them there .ivc and .rsp files now i have rslogix5 and 500 but cant open them any reason why? and if not maybe someone has run into the inview problem and can help.
Thanks Craig

 

[Johnnykool]

Hi Don't have inview but have you tried this site:

http://literature.rockwellautomation.com

Try typing in "inview" in Search library by:

 

[cisco1]

Thanks for the help.

 

[cjmagm]

yeah i have been there, and i went to the knowledgebase part, but i dont have the correct software to open the files i.e. .ivc or .rsp. I tried at work with the .rsp but even then i cant get it to open so i guess im just stuck but thanks for the help.