Poorpaulus
Automotive
I have got an invalid edge which I can't get rid of. It appears to be floating in space.
How do I track down the problem?
Paul.
How do I track down the problem?
Paul.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Invalid Edge
- Thread starter Poorpaulus
- Start date
- Status
- Thread starter
- #3
Poorpaulus
Automotive
It is a surface. It has been offset from an imported IGES model. I am trying to do a surface cut using this surface. I am assuming that the invalid edge is causing it not to work.
Paul.
Paul.
Did you do a Diagnose on the surface (if had any) when you first imported it? (You only get this option if don't add anything or do anything to the model when it's first imported)
Did you do a tools\check before working on the model?
Regards,
Scott Baugh, CSWP![[borg2]](/data/assets/smilies/borg2.gif "[borg2] [borg2]")
faq731-376
Did you do a tools\check before working on the model?
Regards,
Scott Baugh, CSWP
faq731-376
- Status