Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Invalid Bend Param Value

Status
Not open for further replies.
goagerbil

goagerbil

Mechanical
Jun 6, 2006
1
On using Contour Flange or Flange in Sheet Metal, I'm getting an error message, "Invalid Bend Param Value", or "Invalid Bend Param Type". I'm not doing anything different to normal and it works on a second PC. The Sheet Metal templates are exactly the same. Anybody know what the problem is?
 
Status
Not open for further replies.

Similar threads

John_W2
  • Locked
  • News
Parametric patterns in drawings
Replies
0
Views
771
John_W2
John_W2
Spaceballster
  • Locked
  • Question
Units in value fields
Replies
3
Views
185
beachcomber
beachcomber
Fonzee
  • Locked
  • Question
Modify Bend Angle, then flatten
Replies
1
Views
146
teebarr
teebarr
david6545
  • Locked
  • Question
st3 version - cannot change value in dynamic input box
Replies
2
Views
200
gonsie2
gonsie2
plcorriveau
  • Locked
  • Question
Bend lines - Up or Down
Replies
3
Views
367
beachcomber
beachcomber

Part and Inventory Search

Sponsor

Back
Top Bottom